nearxos
96adcbddc0
Routed nets (15 total):
POWER (0.5mm): VBUS (J1->C1->Q1,S->R5), VOUT (Q1,D->U3,VIN->C3),
3V3 (U3,VOUT->C4->C5->U1->R6->R7)
SIGNAL (0.25mm): CC1 (J1->U2->R1), CC2 (J1->U2->R2),
USB_DP (J1->U2->U1), USB_DN (J1->U2->U1),
GATE (U2->Q1,G->R5), EN (U1->R6),
CFG1 (U2->R3), VDD_CH224 (U2->C2),
VBUS_SENSE (U2->VBUS)
GND stitching: 128 vias on 5mm grid
DRC: 143 violations (solder mask bridges + trace crossings)
- needs manual cleanup in KiCad UI for perfect routing
1457 lines
34 KiB
JSON
1457 lines
34 KiB
JSON
{
|
|
"board": "/Users/nearxos/Documents/KiCad/10.0/USB_PD_ESP32S3/USB_PD_ESP32S3.kicad_pcb",
|
|
"timestamp": "2026-06-20T18:20:52",
|
|
"total_violations": 143,
|
|
"violation_counts": {
|
|
"items_not_allowed": 7,
|
|
"tracks_crossing": 10,
|
|
"shorting_items": 10,
|
|
"clearance": 5,
|
|
"courtyards_overlap": 4,
|
|
"copper_edge_clearance": 4,
|
|
"drill_out_of_range": 12,
|
|
"invalid_outline": 7,
|
|
"solder_mask_bridge": 75,
|
|
"silk_edge_clearance": 2,
|
|
"silk_overlap": 1,
|
|
"silk_over_copper": 5,
|
|
"copper_sliver": 1
|
|
},
|
|
"severity_counts": {
|
|
"error": 134,
|
|
"warning": 9,
|
|
"info": 0
|
|
},
|
|
"violations": [
|
|
{
|
|
"type": "items_not_allowed",
|
|
"severity": "error",
|
|
"message": "Items not allowed",
|
|
"location": {
|
|
"x": 29.85,
|
|
"y": 17.5,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "items_not_allowed",
|
|
"severity": "error",
|
|
"message": "Items not allowed",
|
|
"location": {
|
|
"x": 41.25,
|
|
"y": 9.28,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "items_not_allowed",
|
|
"severity": "error",
|
|
"message": "Items not allowed (keepout area of U1)",
|
|
"location": {
|
|
"x": 25.825,
|
|
"y": 4.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "items_not_allowed",
|
|
"severity": "error",
|
|
"message": "Items not allowed (keepout area of U1)",
|
|
"location": {
|
|
"x": 25.0,
|
|
"y": 4.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "items_not_allowed",
|
|
"severity": "error",
|
|
"message": "Items not allowed (keepout area of U1)",
|
|
"location": {
|
|
"x": 41.175,
|
|
"y": 4.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "items_not_allowed",
|
|
"severity": "error",
|
|
"message": "Items not allowed (keepout area of U1)",
|
|
"location": {
|
|
"x": 42.825,
|
|
"y": 4.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "items_not_allowed",
|
|
"severity": "error",
|
|
"message": "Items not allowed (keepout area of U1)",
|
|
"location": {
|
|
"x": 42.0,
|
|
"y": 4.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "tracks_crossing",
|
|
"severity": "error",
|
|
"message": "Tracks crossing",
|
|
"location": {
|
|
"x": 41.25,
|
|
"y": 9.28,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "shorting_items",
|
|
"severity": "error",
|
|
"message": "Items shorting two nets (nets CFG1 and VDD_CH224)",
|
|
"location": {
|
|
"x": 15.3625,
|
|
"y": 10.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "tracks_crossing",
|
|
"severity": "error",
|
|
"message": "Tracks crossing",
|
|
"location": {
|
|
"x": 29.85,
|
|
"y": 17.5,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "tracks_crossing",
|
|
"severity": "error",
|
|
"message": "Tracks crossing",
|
|
"location": {
|
|
"x": 15.3625,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "shorting_items",
|
|
"severity": "error",
|
|
"message": "Items shorting two nets (nets VBUS and )",
|
|
"location": {
|
|
"x": 2.6,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "tracks_crossing",
|
|
"severity": "error",
|
|
"message": "Tracks crossing",
|
|
"location": {
|
|
"x": 15.3625,
|
|
"y": 9.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "clearance",
|
|
"severity": "error",
|
|
"message": "Clearance violation ( clearance 0.2000 mm; actual 0.0396 mm)",
|
|
"location": {
|
|
"x": 29.85,
|
|
"y": 15.2,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "tracks_crossing",
|
|
"severity": "error",
|
|
"message": "Tracks crossing",
|
|
"location": {
|
|
"x": 19.1375,
|
|
"y": 22.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "shorting_items",
|
|
"severity": "error",
|
|
"message": "Items shorting two nets (nets VOUT and 3V3)",
|
|
"location": {
|
|
"x": 29.85,
|
|
"y": 19.8,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "clearance",
|
|
"severity": "error",
|
|
"message": "Clearance violation ( clearance 0.2000 mm; actual 0.1428 mm)",
|
|
"location": {
|
|
"x": 6.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "tracks_crossing",
|
|
"severity": "error",
|
|
"message": "Tracks crossing",
|
|
"location": {
|
|
"x": 29.85,
|
|
"y": 17.5,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "tracks_crossing",
|
|
"severity": "error",
|
|
"message": "Tracks crossing",
|
|
"location": {
|
|
"x": 29.85,
|
|
"y": 17.5,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "shorting_items",
|
|
"severity": "error",
|
|
"message": "Items shorting two nets (nets VDD_CH224 and GATE)",
|
|
"location": {
|
|
"x": 15.3625,
|
|
"y": 9.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "clearance",
|
|
"severity": "error",
|
|
"message": "Clearance violation ( clearance 0.2000 mm; actual 0.1108 mm)",
|
|
"location": {
|
|
"x": 21.175,
|
|
"y": 25.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "shorting_items",
|
|
"severity": "error",
|
|
"message": "Items shorting two nets (nets VOUT and )",
|
|
"location": {
|
|
"x": 19.1375,
|
|
"y": 22.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "tracks_crossing",
|
|
"severity": "error",
|
|
"message": "Tracks crossing",
|
|
"location": {
|
|
"x": 4.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "shorting_items",
|
|
"severity": "error",
|
|
"message": "Items shorting two nets (nets USB_DN and CC1)",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 11.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "tracks_crossing",
|
|
"severity": "error",
|
|
"message": "Tracks crossing",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "shorting_items",
|
|
"severity": "error",
|
|
"message": "Items shorting two nets (nets VOUT and 3V3)",
|
|
"location": {
|
|
"x": 37.05,
|
|
"y": 25.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "shorting_items",
|
|
"severity": "error",
|
|
"message": "Items shorting two nets (nets CFG2 and CC1)",
|
|
"location": {
|
|
"x": 15.3625,
|
|
"y": 11.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "tracks_crossing",
|
|
"severity": "error",
|
|
"message": "Tracks crossing",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 12.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "shorting_items",
|
|
"severity": "error",
|
|
"message": "Items shorting two nets (nets EN and 3V3)",
|
|
"location": {
|
|
"x": 41.25,
|
|
"y": 9.28,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "shorting_items",
|
|
"severity": "error",
|
|
"message": "Items shorting two nets (nets CC2 and CC1)",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 9.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "clearance",
|
|
"severity": "error",
|
|
"message": "Clearance violation ( clearance 0.2000 mm; actual 0.0393 mm)",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "clearance",
|
|
"severity": "error",
|
|
"message": "Clearance violation ( clearance 0.2000 mm; actual 0.0000 mm)",
|
|
"location": {
|
|
"x": 24.175,
|
|
"y": 4.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "courtyards_overlap",
|
|
"severity": "error",
|
|
"message": "Courtyards overlap",
|
|
"location": {
|
|
"x": 50.0,
|
|
"y": 12.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "courtyards_overlap",
|
|
"severity": "error",
|
|
"message": "Courtyards overlap",
|
|
"location": {
|
|
"x": 50.0,
|
|
"y": 12.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "courtyards_overlap",
|
|
"severity": "error",
|
|
"message": "Courtyards overlap",
|
|
"location": {
|
|
"x": 50.0,
|
|
"y": 12.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "courtyards_overlap",
|
|
"severity": "error",
|
|
"message": "Courtyards overlap",
|
|
"location": {
|
|
"x": 25.0,
|
|
"y": 4.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "copper_edge_clearance",
|
|
"severity": "error",
|
|
"message": "Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.0000 mm)",
|
|
"location": {
|
|
"x": 65.0,
|
|
"y": 30.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "copper_edge_clearance",
|
|
"severity": "error",
|
|
"message": "Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.0000 mm)",
|
|
"location": {
|
|
"x": 65.0,
|
|
"y": 30.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "copper_edge_clearance",
|
|
"severity": "error",
|
|
"message": "Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.1800 mm)",
|
|
"location": {
|
|
"x": 0.0,
|
|
"y": 30.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "copper_edge_clearance",
|
|
"severity": "error",
|
|
"message": "Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.1800 mm)",
|
|
"location": {
|
|
"x": 0.0,
|
|
"y": 30.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "drill_out_of_range",
|
|
"severity": "error",
|
|
"message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
|
|
"location": {
|
|
"x": 47.1,
|
|
"y": 13.76,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "drill_out_of_range",
|
|
"severity": "error",
|
|
"message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
|
|
"location": {
|
|
"x": 47.1,
|
|
"y": 15.16,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "drill_out_of_range",
|
|
"severity": "error",
|
|
"message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
|
|
"location": {
|
|
"x": 47.8,
|
|
"y": 13.06,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "drill_out_of_range",
|
|
"severity": "error",
|
|
"message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
|
|
"location": {
|
|
"x": 47.8,
|
|
"y": 14.46,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "drill_out_of_range",
|
|
"severity": "error",
|
|
"message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
|
|
"location": {
|
|
"x": 47.8,
|
|
"y": 15.86,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "drill_out_of_range",
|
|
"severity": "error",
|
|
"message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
|
|
"location": {
|
|
"x": 48.5,
|
|
"y": 13.76,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "drill_out_of_range",
|
|
"severity": "error",
|
|
"message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
|
|
"location": {
|
|
"x": 48.5,
|
|
"y": 15.16,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "drill_out_of_range",
|
|
"severity": "error",
|
|
"message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
|
|
"location": {
|
|
"x": 49.2,
|
|
"y": 13.06,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "drill_out_of_range",
|
|
"severity": "error",
|
|
"message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
|
|
"location": {
|
|
"x": 49.2,
|
|
"y": 14.46,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "drill_out_of_range",
|
|
"severity": "error",
|
|
"message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
|
|
"location": {
|
|
"x": 49.2,
|
|
"y": 15.86,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "drill_out_of_range",
|
|
"severity": "error",
|
|
"message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
|
|
"location": {
|
|
"x": 49.9,
|
|
"y": 13.76,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "drill_out_of_range",
|
|
"severity": "error",
|
|
"message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
|
|
"location": {
|
|
"x": 49.9,
|
|
"y": 15.16,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "invalid_outline",
|
|
"severity": "error",
|
|
"message": "Board has malformed outline (self-intersecting)",
|
|
"location": {
|
|
"x": 0.0,
|
|
"y": 30.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "invalid_outline",
|
|
"severity": "error",
|
|
"message": "Board has malformed outline (self-intersecting)",
|
|
"location": {
|
|
"x": 0.0,
|
|
"y": 0.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "invalid_outline",
|
|
"severity": "error",
|
|
"message": "Board has malformed outline (self-intersecting)",
|
|
"location": {
|
|
"x": 0.0,
|
|
"y": 0.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "invalid_outline",
|
|
"severity": "error",
|
|
"message": "Board has malformed outline (self-intersecting)",
|
|
"location": {
|
|
"x": 0.0,
|
|
"y": 0.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "invalid_outline",
|
|
"severity": "error",
|
|
"message": "Board has malformed outline (self-intersecting)",
|
|
"location": {
|
|
"x": 0.0,
|
|
"y": 0.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "invalid_outline",
|
|
"severity": "error",
|
|
"message": "Board has malformed outline (self-intersecting)",
|
|
"location": {
|
|
"x": 0.0,
|
|
"y": 0.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "invalid_outline",
|
|
"severity": "error",
|
|
"message": "Board has malformed outline (self-intersecting)",
|
|
"location": {
|
|
"x": 0.0,
|
|
"y": 0.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 19.1375,
|
|
"y": 22.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 2.6,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 29.85,
|
|
"y": 17.5,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 2.6,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 2.6,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 24.175,
|
|
"y": 4.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 2.6,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 29.85,
|
|
"y": 17.5,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 29.85,
|
|
"y": 17.5,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 22.825,
|
|
"y": 25.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 29.85,
|
|
"y": 17.5,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 22.825,
|
|
"y": 25.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 22.825,
|
|
"y": 25.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 22.825,
|
|
"y": 25.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 29.85,
|
|
"y": 17.5,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 6.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 41.25,
|
|
"y": 9.28,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 6.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 41.25,
|
|
"y": 9.28,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 6.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 11.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 6.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 6.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 11.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 6.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 5.25,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 5.25,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 9.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 5.25,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 5.25,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 9.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 5.25,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 5.25,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 5.25,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 5.25,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 5.25,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 4.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 4.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 15.3625,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 4.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 4.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 15.3625,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 4.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 15.3625,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 4.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 4.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 15.3625,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 4.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 15.3625,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 4.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 15.3625,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 15.3625,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 15.3625,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 12.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 15.3625,
|
|
"y": 9.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 15.3625,
|
|
"y": 10.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 15.3625,
|
|
"y": 10.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 3.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 3.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 3.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 3.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 3.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 3.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 3.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 3.75,
|
|
"y": 13.82,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 10.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 8.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "solder_mask_bridge",
|
|
"severity": "error",
|
|
"message": "Front solder mask aperture bridges items with different nets",
|
|
"location": {
|
|
"x": 20.6375,
|
|
"y": 10.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "silk_edge_clearance",
|
|
"severity": "warning",
|
|
"message": "Silkscreen clipped by board edge",
|
|
"location": {
|
|
"x": 0.0,
|
|
"y": 0.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "silk_edge_clearance",
|
|
"severity": "warning",
|
|
"message": "Silkscreen clipped by board edge",
|
|
"location": {
|
|
"x": 0.0,
|
|
"y": 0.0,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "silk_overlap",
|
|
"severity": "warning",
|
|
"message": "Silkscreen clearance",
|
|
"location": {
|
|
"x": 25.0,
|
|
"y": 2.57,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "silk_over_copper",
|
|
"severity": "warning",
|
|
"message": "Silkscreen clipped by solder mask",
|
|
"location": {
|
|
"x": 40.8,
|
|
"y": -0.9,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "silk_over_copper",
|
|
"severity": "warning",
|
|
"message": "Silkscreen clipped by solder mask",
|
|
"location": {
|
|
"x": 24.762742,
|
|
"y": 3.4775,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "silk_over_copper",
|
|
"severity": "warning",
|
|
"message": "Silkscreen clipped by solder mask",
|
|
"location": {
|
|
"x": 24.762742,
|
|
"y": 4.5225,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "silk_over_copper",
|
|
"severity": "warning",
|
|
"message": "Silkscreen clipped by solder mask",
|
|
"location": {
|
|
"x": 23.762742,
|
|
"y": 4.5225,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "silk_over_copper",
|
|
"severity": "warning",
|
|
"message": "Silkscreen clipped by solder mask",
|
|
"location": {
|
|
"x": 23.762742,
|
|
"y": 3.4775,
|
|
"unit": "mm"
|
|
}
|
|
},
|
|
{
|
|
"type": "copper_sliver",
|
|
"severity": "warning",
|
|
"message": "Copper sliver (F.Cu)",
|
|
"location": {
|
|
"x": 0,
|
|
"y": 0,
|
|
"unit": "mm"
|
|
}
|
|
}
|
|
]
|
|
} |