{
  "board": "/Users/nearxos/Documents/KiCad/10.0/USB_PD_ESP32S3/USB_PD_ESP32S3.kicad_pcb",
  "timestamp": "2026-06-20T18:20:52",
  "total_violations": 143,
  "violation_counts": {
    "items_not_allowed": 7,
    "tracks_crossing": 10,
    "shorting_items": 10,
    "clearance": 5,
    "courtyards_overlap": 4,
    "copper_edge_clearance": 4,
    "drill_out_of_range": 12,
    "invalid_outline": 7,
    "solder_mask_bridge": 75,
    "silk_edge_clearance": 2,
    "silk_overlap": 1,
    "silk_over_copper": 5,
    "copper_sliver": 1
  },
  "severity_counts": {
    "error": 134,
    "warning": 9,
    "info": 0
  },
  "violations": [
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed",
      "location": {
        "x": 29.85,
        "y": 17.5,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed",
      "location": {
        "x": 41.25,
        "y": 9.28,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 25.825,
        "y": 4.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 25.0,
        "y": 4.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 41.175,
        "y": 4.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 42.825,
        "y": 4.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 42.0,
        "y": 4.0,
        "unit": "mm"
      }
    },
    {
      "type": "tracks_crossing",
      "severity": "error",
      "message": "Tracks crossing",
      "location": {
        "x": 41.25,
        "y": 9.28,
        "unit": "mm"
      }
    },
    {
      "type": "shorting_items",
      "severity": "error",
      "message": "Items shorting two nets (nets CFG1 and VDD_CH224)",
      "location": {
        "x": 15.3625,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "tracks_crossing",
      "severity": "error",
      "message": "Tracks crossing",
      "location": {
        "x": 29.85,
        "y": 17.5,
        "unit": "mm"
      }
    },
    {
      "type": "tracks_crossing",
      "severity": "error",
      "message": "Tracks crossing",
      "location": {
        "x": 15.3625,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "shorting_items",
      "severity": "error",
      "message": "Items shorting two nets (nets VBUS and )",
      "location": {
        "x": 2.6,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "tracks_crossing",
      "severity": "error",
      "message": "Tracks crossing",
      "location": {
        "x": 15.3625,
        "y": 9.0,
        "unit": "mm"
      }
    },
    {
      "type": "clearance",
      "severity": "error",
      "message": "Clearance violation ( clearance 0.2000 mm; actual 0.0396 mm)",
      "location": {
        "x": 29.85,
        "y": 15.2,
        "unit": "mm"
      }
    },
    {
      "type": "tracks_crossing",
      "severity": "error",
      "message": "Tracks crossing",
      "location": {
        "x": 19.1375,
        "y": 22.0,
        "unit": "mm"
      }
    },
    {
      "type": "shorting_items",
      "severity": "error",
      "message": "Items shorting two nets (nets VOUT and 3V3)",
      "location": {
        "x": 29.85,
        "y": 19.8,
        "unit": "mm"
      }
    },
    {
      "type": "clearance",
      "severity": "error",
      "message": "Clearance violation ( clearance 0.2000 mm; actual 0.1428 mm)",
      "location": {
        "x": 6.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "tracks_crossing",
      "severity": "error",
      "message": "Tracks crossing",
      "location": {
        "x": 29.85,
        "y": 17.5,
        "unit": "mm"
      }
    },
    {
      "type": "tracks_crossing",
      "severity": "error",
      "message": "Tracks crossing",
      "location": {
        "x": 29.85,
        "y": 17.5,
        "unit": "mm"
      }
    },
    {
      "type": "shorting_items",
      "severity": "error",
      "message": "Items shorting two nets (nets VDD_CH224 and GATE)",
      "location": {
        "x": 15.3625,
        "y": 9.0,
        "unit": "mm"
      }
    },
    {
      "type": "clearance",
      "severity": "error",
      "message": "Clearance violation ( clearance 0.2000 mm; actual 0.1108 mm)",
      "location": {
        "x": 21.175,
        "y": 25.0,
        "unit": "mm"
      }
    },
    {
      "type": "shorting_items",
      "severity": "error",
      "message": "Items shorting two nets (nets VOUT and )",
      "location": {
        "x": 19.1375,
        "y": 22.0,
        "unit": "mm"
      }
    },
    {
      "type": "tracks_crossing",
      "severity": "error",
      "message": "Tracks crossing",
      "location": {
        "x": 4.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "shorting_items",
      "severity": "error",
      "message": "Items shorting two nets (nets USB_DN and CC1)",
      "location": {
        "x": 20.6375,
        "y": 11.0,
        "unit": "mm"
      }
    },
    {
      "type": "tracks_crossing",
      "severity": "error",
      "message": "Tracks crossing",
      "location": {
        "x": 20.6375,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "shorting_items",
      "severity": "error",
      "message": "Items shorting two nets (nets VOUT and 3V3)",
      "location": {
        "x": 37.05,
        "y": 25.0,
        "unit": "mm"
      }
    },
    {
      "type": "shorting_items",
      "severity": "error",
      "message": "Items shorting two nets (nets CFG2 and CC1)",
      "location": {
        "x": 15.3625,
        "y": 11.0,
        "unit": "mm"
      }
    },
    {
      "type": "tracks_crossing",
      "severity": "error",
      "message": "Tracks crossing",
      "location": {
        "x": 20.6375,
        "y": 12.0,
        "unit": "mm"
      }
    },
    {
      "type": "shorting_items",
      "severity": "error",
      "message": "Items shorting two nets (nets EN and 3V3)",
      "location": {
        "x": 41.25,
        "y": 9.28,
        "unit": "mm"
      }
    },
    {
      "type": "shorting_items",
      "severity": "error",
      "message": "Items shorting two nets (nets CC2 and CC1)",
      "location": {
        "x": 20.6375,
        "y": 9.0,
        "unit": "mm"
      }
    },
    {
      "type": "clearance",
      "severity": "error",
      "message": "Clearance violation ( clearance 0.2000 mm; actual 0.0393 mm)",
      "location": {
        "x": 20.6375,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "clearance",
      "severity": "error",
      "message": "Clearance violation ( clearance 0.2000 mm; actual 0.0000 mm)",
      "location": {
        "x": 24.175,
        "y": 4.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 50.0,
        "y": 12.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 50.0,
        "y": 12.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 50.0,
        "y": 12.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 25.0,
        "y": 4.0,
        "unit": "mm"
      }
    },
    {
      "type": "copper_edge_clearance",
      "severity": "error",
      "message": "Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.0000 mm)",
      "location": {
        "x": 65.0,
        "y": 30.0,
        "unit": "mm"
      }
    },
    {
      "type": "copper_edge_clearance",
      "severity": "error",
      "message": "Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.0000 mm)",
      "location": {
        "x": 65.0,
        "y": 30.0,
        "unit": "mm"
      }
    },
    {
      "type": "copper_edge_clearance",
      "severity": "error",
      "message": "Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.1800 mm)",
      "location": {
        "x": 0.0,
        "y": 30.0,
        "unit": "mm"
      }
    },
    {
      "type": "copper_edge_clearance",
      "severity": "error",
      "message": "Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.1800 mm)",
      "location": {
        "x": 0.0,
        "y": 30.0,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 47.1,
        "y": 13.76,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 47.1,
        "y": 15.16,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 47.8,
        "y": 13.06,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 47.8,
        "y": 14.46,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 47.8,
        "y": 15.86,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 48.5,
        "y": 13.76,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 48.5,
        "y": 15.16,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 49.2,
        "y": 13.06,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 49.2,
        "y": 14.46,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 49.2,
        "y": 15.86,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 49.9,
        "y": 13.76,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 49.9,
        "y": 15.16,
        "unit": "mm"
      }
    },
    {
      "type": "invalid_outline",
      "severity": "error",
      "message": "Board has malformed outline (self-intersecting)",
      "location": {
        "x": 0.0,
        "y": 30.0,
        "unit": "mm"
      }
    },
    {
      "type": "invalid_outline",
      "severity": "error",
      "message": "Board has malformed outline (self-intersecting)",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "invalid_outline",
      "severity": "error",
      "message": "Board has malformed outline (self-intersecting)",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "invalid_outline",
      "severity": "error",
      "message": "Board has malformed outline (self-intersecting)",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "invalid_outline",
      "severity": "error",
      "message": "Board has malformed outline (self-intersecting)",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "invalid_outline",
      "severity": "error",
      "message": "Board has malformed outline (self-intersecting)",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "invalid_outline",
      "severity": "error",
      "message": "Board has malformed outline (self-intersecting)",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 19.1375,
        "y": 22.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 2.6,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 29.85,
        "y": 17.5,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 2.6,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 2.6,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 24.175,
        "y": 4.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 2.6,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 29.85,
        "y": 17.5,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 29.85,
        "y": 17.5,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 22.825,
        "y": 25.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 29.85,
        "y": 17.5,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 22.825,
        "y": 25.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 22.825,
        "y": 25.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 22.825,
        "y": 25.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 29.85,
        "y": 17.5,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 6.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 41.25,
        "y": 9.28,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 6.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 41.25,
        "y": 9.28,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 6.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 20.6375,
        "y": 11.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 6.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 6.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 20.6375,
        "y": 11.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 6.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 5.25,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 5.25,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 20.6375,
        "y": 9.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 5.25,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 5.25,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 20.6375,
        "y": 9.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 5.25,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 5.25,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 5.25,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 5.25,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 5.25,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 4.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 4.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 15.3625,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 4.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 4.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 15.3625,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 4.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 15.3625,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 4.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 4.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 15.3625,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 4.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 15.3625,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 4.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 15.3625,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 15.3625,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 15.3625,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 20.6375,
        "y": 12.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 15.3625,
        "y": 9.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 15.3625,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 15.3625,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 3.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 20.6375,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 3.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 3.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 3.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 20.6375,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 20.6375,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 3.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 3.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 20.6375,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 3.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 20.6375,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 3.75,
        "y": 13.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 20.6375,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 20.6375,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 20.6375,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 20.6375,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 20.6375,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "silk_edge_clearance",
      "severity": "warning",
      "message": "Silkscreen clipped by board edge",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "silk_edge_clearance",
      "severity": "warning",
      "message": "Silkscreen clipped by board edge",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "silk_overlap",
      "severity": "warning",
      "message": "Silkscreen clearance",
      "location": {
        "x": 25.0,
        "y": 2.57,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 40.8,
        "y": -0.9,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 24.762742,
        "y": 3.4775,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 24.762742,
        "y": 4.5225,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 23.762742,
        "y": 4.5225,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 23.762742,
        "y": 3.4775,
        "unit": "mm"
      }
    },
    {
      "type": "copper_sliver",
      "severity": "warning",
      "message": "Copper sliver (F.Cu)",
      "location": {
        "x": 0,
        "y": 0,
        "unit": "mm"
      }
    }
  ]
}