USB_PD_ESP32S3

Go to file

nearxos 76e7bb2513 Fix J1 to 270° — KiCad uses CLOCKWISE rotation

Root cause: KiCad rotation is clockwise, not CCW.
- 90° CW: port faces +X (RIGHT, into board) — WRONG
- 270° CW: port faces -X (LEFT, toward edge) — CORRECT

Verified against actual pad coordinate transforms.

2026-06-21 16:37:39 +03:00

.gitignore

Fix J1 to 180°, move R6/R7/R8/C5 away from ESP32, orthogonal 3V3/3V3_ESR/EN routing on B.Cu

2026-06-21 16:25:44 +03:00

sym-lib-table

USB-C PD board with ESP32-S3

2026-06-20 17:31:20 +03:00

untitled-erc.rpt

Fix schematic syntax & finalize ERC

2026-06-20 17:40:26 +03:00

USB_PD_ESP32S3_drc_violations.json

Rebuild: fix J1 orientation (90°), re-place all components, Freerouting orthogonal routing, 84 GND vias

2026-06-21 12:19:07 +03:00

USB_PD_ESP32S3-erc.rpt

Fix schematic: restore all wire connections, separate 3V3 from GND

2026-06-20 17:47:37 +03:00

USB_PD_ESP32S3.kicad_pcb

Fix J1 to 270° — KiCad uses CLOCKWISE rotation

2026-06-21 16:37:39 +03:00

USB_PD_ESP32S3.kicad_prl

Fix J1 orientation to 90° — mating face now faces left board edge

2026-06-21 16:33:47 +03:00

USB_PD_ESP32S3.kicad_pro

Add R9 (0.47R ESR for LD1117 stability) + R10 (22R gate resistor) + optimize placement

2026-06-21 09:10:57 +03:00

USB_PD_ESP32S3.kicad_sch

Add R9 (0.47R ESR for LD1117 stability) + R10 (22R gate resistor) + optimize placement

2026-06-21 09:10:57 +03:00

USB_PD_ESP32S3.kicad_sym

USB-C PD board with ESP32-S3

2026-06-20 17:31:20 +03:00