kicad-mcp-server/CHANGELOG.md

# Changelog

All notable changes to the KiCAD MCP Server project are documented here.

## [2.2.3] - 2026-03-11

### Merged: PR #57 (Kletternaut/demo/rpiCSI-videotest → main)

This release incorporates 28 commits developed and live-tested during a full
Raspberry Pi CSI adapter PCB design session. All tools listed below were validated
end-to-end using Claude Desktop + KiCAD 9 on Windows.

### New MCP Tools

- `connect_passthrough` — Schematic-only tool that wires all pins of one connector
  directly to the matching pins of another (e.g. J1 pin N → J2 pin N). Creates nets
  named with a configurable prefix (`netPrefix`). Designed for FFC/ribbon cable
  passthrough adapters. **Schematic only — do not call for PCB routing.**

- `sync_schematic_to_board` — Imports all net/pad assignments from the schematic
  into the open PCB file. Required after `connect_passthrough` before routing can
  start. Returns `pads_assigned` count for verification.

- `snapshot_project` — Saves a named checkpoint of the entire project folder into a
  `snapshots/` subdirectory inside the project. Allows resuming from a known-good
  state without redoing earlier steps. Accepts `step`, `label`, and optional `prompt`
  parameters.

- `run_erc` — Runs KiCAD's Electrical Rules Check on the schematic and returns
  violations as structured JSON.

- `import_svg_logo` — Converts an SVG file to PCB silkscreen polygons and places
  them on a specified layer.

### Bug Fixes

- `route_pad_to_pad`: **Critical fix for B.Cu footprints in KiCAD 9.** `pad.GetLayerName()`
  always returned `F.Cu` for SMD pads on flipped footprints (KiCAD 9 SWIG bug).
  Fix: use `footprint.GetLayer()` instead, which correctly reflects the placed layer
  after `Flip()`. Without this fix, no vias were inserted for back-to-back connectors.

- `route_pad_to_pad`: Via was placed at the geometric midpoint between the two pads.
  For back-to-back mirrored connectors (J1 F.Cu / J2 B.Cu) this caused all 15 vias
  to stack at the same X coordinate (board center). Fix: via is now placed at the
  X coordinate of the start pad (`via_x = start_pos.x`), producing 15 parallel
  vertical traces.

- `place_component` (B.Cu footprints): `Flip()` was called before `board.Add()`,
  causing KiCAD 9 to hang for ~30 seconds. Fix: `board.Add()` first, then `Flip()`.

- `add_board_outline`: Three separate bugs fixed — incorrect cornerRadius fallback,
  wrong top-left origin default, and broken arc delegation for IPC rounded rectangles.

- `snapshot_project`: Snapshots were saved one level above the project directory,
  cluttering the parent folder. Fix: snapshots now go into `<project>/snapshots/`.

- MCP server log timestamp was always UTC/ISO. Fix: now uses local system time.

- `search_tools` (router pattern): direct tools like `snapshot_project` were invisible
  to the router. Fix: direct tool names added to the router's known-tool list.

### Developer Mode (`KICAD_MCP_DEV=1`)

Set the environment variable `KICAD_MCP_DEV=1` in your Claude Desktop config to
enable developer features:

```json
"env": {
  "KICAD_MCP_DEV": "1"
}
```

**What it does:**

- `export_gerber` automatically copies the current MCP session log into the project's
  `logs/` subdirectory as `mcp_log_<timestamp>.txt`.
- `snapshot_project` copies the MCP session log into `logs/` at every checkpoint as
  `mcp_log_step<N>_<timestamp>.txt`.
- If a `prompt` parameter is passed to `snapshot_project`, it is saved as
  `PROMPT_step<N>_<timestamp>.md` alongside the log.

**Purpose:** Makes it easy to include the full tool call history when filing a bug
report or GitHub issue — just attach the log file from the project's `logs/` folder.

> ⚠️ **Privacy warning:** The MCP session log contains the **complete conversation
> history** between Claude and the MCP server, including all tool parameters and
> responses. When sharing a project directory (e.g. as a ZIP attachment in a GitHub
> issue), **review or delete the `logs/` folder first** to avoid accidentally
> disclosing sensitive file paths, component names, or design details.

### Snapshot Logging (always active)

Regardless of dev mode, `snapshot_project` now always saves a copy of the current
MCP session log into `<project>/logs/` at each checkpoint. This means every project
automatically retains a traceable record of which tools were called and in what order.

> ⚠️ **Same privacy note applies:** the `logs/` directory inside your project folder
> contains tool call history. Do not share it publicly without reviewing its contents.

---

## [2.2.2-alpha] - 2026-03-01

### New MCP Tools

- `route_pad_to_pad` – Convenience wrapper around `route_trace` that looks up pad positions
  automatically. Accepts `fromRef`/`fromPad`/`toRef`/`toPad` instead of raw XY coordinates.
  Auto-detects net from pad assignment (overridable via `net` param). Saves ~2 tool calls per
  connection (~64 calls for a full TMC2209 board compared to the 3-step get_pad_position flow).
  Live tested: ESP32 ↔ TMC2209 STEP/DIR traces routed without prior coordinate lookup. ✅

- `copy_routing_pattern` – Now registered as MCP tool in TypeScript layer (`routing.ts`).
  Was previously implemented in Python but missing from the MCP tool registry.
  Parameters: `sourceRefs`, `targetRefs`, `includeVias?`, `traceWidth?`.

### Bug Fixes

- `add_schematic_component` / `DynamicSymbolLoader`: ignored project-local `sym-lib-table`.
  `find_library_file()` only searched global KiCAD install directories, causing "library not
  found" errors for any symbol in a project-local `.kicad_sym` file. Fix: added `project_path`
  parameter; reads project `sym-lib-table` first via new `_resolve_library_from_table()` helper
  before falling back to global dirs. `project_path` is auto-derived from the schematic path.

- `place_component`: ignored project-local `fp-lib-table`. `FootprintLibraryManager` was
  initialised once at server start without a project path, so self-created `.kicad_mod`
  footprints were never found. Fix: new `boardPath` parameter in TypeScript + Python;
  `_handle_place_component` wrapper recreates `FootprintLibraryManager(project_path=…)` whenever
  the active project changes (cached to avoid redundant recreation).

- `copy_routing_pattern`: copied 0 traces when pads had no net assignments. The filter
  `track.GetNetname() in source_nets` always returned empty when pads were placed without net
  assignment. Fix: geometric fallback using bounding box of source footprint pads ±5mm
  tolerance. Response includes `filterMethod` field indicating which mode was used
  (`"net-based"` or `"geometric (pads have no nets)"`).

- `template_with_symbols.kicad_sch`, `template_with_symbols_expanded.kicad_sch`: restored
  format version `20250114` (KiCAD 9) after upstream commit `2b38796` accidentally downgraded
  both files to `20240101`. KiCAD 9 rejects schematics with outdated version numbers.

- **CRITICAL: `template_with_symbols_expanded.kicad_sch`**: removed 7 invalid `;;` comment
  lines introduced by upstream commit `b98c94b`. KiCAD's S-expression parser does not support
  any comment syntax — it expects every non-empty, non-whitespace line to start with `(`.
  The comments (`;; PASSIVES`, `;; SEMICONDUCTORS`, `;; INTEGRATED CIRCUITS`, `;; CONNECTORS`,
  `;; POWER/REGULATORS`, `;; MISC`, `;; TEMPLATE INSTANCES (...)`) caused KiCAD 9 to reject
  every schematic created from this template with a hard parse error:

  > `Expecting '(' in <file>.kicad_sch, line 8, offset 5`
  > **Action required for existing projects:** delete every line beginning with `;;` from any
  > `.kicad_sch` file created between upstream commit `b98c94b` and this fix.

- `add_schematic_component` / `inject_symbol_into_schematic`: symbol definition in
  `lib_symbols` was never refreshed after editing via `create_symbol` / `edit_symbol`.
  If the symbol was already present in the schematic's embedded `lib_symbols` section,
  the function returned immediately — `delete + re-add` still pulled in the stale cached
  definition. Fix: always read the current definition from the `.kicad_sym` file; if a
  stale entry exists in `lib_symbols`, remove it first, then inject the fresh one.
  Verified live. ✅

- `template_with_symbols_expanded.kicad_sch`: removed 13 legacy `_TEMPLATE_*` offscreen
  instances (`_TEMPLATE_R`, `_TEMPLATE_C`, `_TEMPLATE_U`, etc.) that were placed at
  `x=-100` as clone-sources for the old `ComponentManager` approach. `DynamicSymbolLoader`
  (the current implementation) injects symbols directly and never needs these placeholders.
  They appeared as dangling reference designators in KiCAD's component navigator and in
  the schematic canvas when zoomed far out.

### Maintenance

- `.gitignore`: added `*.kicad_pcb.bak`, `*.kicad_pro.bak` alongside existing `-bak` variants;
  consolidated personal/local files under `myContribution/`.

---

## [2.2.1-alpha] - 2026-02-28

### New MCP Tools

- `edit_schematic_component` – Update properties of a placed symbol in-place (footprint,
  value, reference rename). More efficient than delete + re-add: preserves position and UUID.

### Bug Fixes

- `add_schematic_component`: `footprint` parameter was accepted but silently ignored – the
  value was never passed through to `DynamicSymbolLoader.add_component()` /
  `create_component_instance()`. All newly placed symbols always had an empty Footprint
  field. Fix: added `footprint: str = ""` to both functions and threaded it through every
  call site including the TypeScript tool schema.

- `delete_schematic_component`: only deleted the first matching instance when duplicate
  references existed (e.g. after an aborted add attempt). Root cause: loop used `break`
  after the first match. Fix: collect all matching blocks first, then delete them all back-
  to-front (to preserve line indices). Response now includes `deleted_count`.

- `templates/*.kicad_sch`, `project.py`, `schematic.py`: Update KiCAD schematic format
  version from `20230121` (KiCAD 7) to `20250114` (KiCAD 9). The MCP server targets
  KiCAD 9 exclusively (`pcbnew.pyd` compiled for KiCAD 9.0, Python 3.11.5) – generating
  files in an outdated format caused a spurious "This file was created with an older
  KiCAD version" warning on every newly created schematic.

- `template_with_symbols_expanded.kicad_sch`: Remove 13 corrupt `_TEMPLATE_*` placed-symbol
  blocks with `(lib_id -100)` – an integer caused by old sexpdata serializer (same bug
  PR #40 fixed for the add path). KiCAD crashed with a null-pointer when selecting these
  symbols. They appeared as grey `_TEMPLATE_R?`, `_TEMPLATE_U_REG?` etc. labels far
  outside the sheet boundary (~5000mm off-sheet).

  **Discovered via:** live testing on a real JLCPCB/KiCAD 9 project.
  **Affected users:** schematics created from this template before this fix contain the
  same corrupt blocks – remove all `(symbol (lib_id -100) ...)` blocks whose Reference
  starts with `_TEMPLATE_`.

---

---

## [2.2.0-alpha] - 2026-02-27

### New MCP Tools (TypeScript layer – previously Python-only)

**Routing tools:**

- `delete_trace` - Delete traces by UUID, position or net name
- `query_traces` - Query/filter traces on the board
- `get_nets_list` - List all nets with net code and class
- `modify_trace` - Modify trace width or layer
- `create_netclass` - Create or update a net class
- `route_differential_pair` - Route a differential pair between two points
- `refill_zones` - Refill all copper zones ⚠️ SWIG segfault risk, prefer IPC/UI

**Component tools:**

- `get_component_pads` - Get all pad data for a component
- `get_component_list` - List all components on the board
- `get_pad_position` - Get absolute position of a specific pad
- `place_component_array` - Place components in a grid array
- `align_components` - Align components along an axis
- `duplicate_component` - Duplicate a component with offset

### Bug Fixes

- `routing.py`: Fix SwigPyObject UUID comparison (`str()` → `m_Uuid.AsString()`)
- `routing.py`: Fix SWIG iterator invalidation after `board.Remove()` by snapshotting `list(board.Tracks())`
- `routing.py`: Add `board.SetModified()` + `track = None` after `Remove()` to prevent dangling SWIG pointer crashes
- `routing.py`: Per-track `try/except` in `query_traces()` to skip invalid objects after bulk delete
- `routing.py`: Add missing return statement (mypy)
- `library.py`: Fix `search_footprints` parameter mapping (`search_term` → `pattern`)
- `library.py`: Fix field access (`fp.name` → `fp.full_name`)
- `library.py`: Accept both `pattern` and `search_term` parameter names
- `library.py`: Fix loop variable shadowing `Path` object (mypy)
- `design_rules.py`: Add type annotation for `violation_counts` (mypy)

### New MCP Tools (cont.)

**Datasheet tools:**

- `get_datasheet_url` - Return LCSC datasheet PDF URL and product page URL for a given
  LCSC number (e.g. `C179739` → `https://www.lcsc.com/datasheet/C179739.pdf`).
  No API key required – URL is constructed directly from the LCSC number.
- `enrich_datasheets` - Scan a `.kicad_sch` file and write LCSC datasheet URLs into
  every symbol that has an `LCSC` property but an empty `Datasheet` field. After
  enrichment the URL appears natively in KiCAD's symbol properties, footprint browser
  and any other tool that reads the standard KiCAD `Datasheet` field.
  Supports `dry_run=true` for preview without writing.
  Implementation: `python/commands/datasheet_manager.py` (text-based, no `skip` writes)

**Schematic tools:**

- `delete_schematic_component` - Remove a placed symbol from a `.kicad_sch` file by
  reference designator (e.g. `R1`, `U3`).

### Bug Fixes (cont.)

- `schematic.ts` / `kicad_interface.py`: Fix missing `delete_schematic_component` MCP tool.

  **Root cause (two separate issues):**
  1. No MCP tool named `delete_schematic_component` existed. Claude had no way to call
     it, so any "delete schematic component" request fell through to the PCB-only
     `delete_component` tool, which searches `pcbnew.BOARD` and always returned
     "Component not found" for schematic symbols.
  2. `component_schematic.py::remove_component()` still used `skip` for writes.
     PR #40 rewrote `DynamicSymbolLoader` (add path) to avoid `skip`-induced schematic
     corruption, but `remove_component` (delete path) was not touched by that PR.

  **Fix:**
  - Added `delete_schematic_component` to the TypeScript tool layer (`schematic.ts`)
    with clear docstring distinguishing it from the PCB `delete_component`.
  - Implemented `_handle_delete_schematic_component` in `kicad_interface.py` using
    direct text manipulation (parenthesis-depth tracking, same approach as PR #40).
    Does not call `component_schematic.py::remove_component()` at all.
  - Error message explicitly guides the user when the wrong tool is used:
    _"note: this tool removes schematic symbols, use delete_component for PCB footprints"_

### Additional Bug Fixes

- `connection_schematic.py` / `kicad_interface.py`: Fix `generate_netlist` missing
  `schematic_path` parameter – without it `get_net_connections` always fell back to
  proximity matching which only returns one connection per component (first wire hit,
  then `break`). PinLocator was never invoked. Fix: added `schematic_path: Optional[Path]`
  to `generate_netlist` signature and threaded it through to `get_net_connections`,
  and updated `_handle_generate_netlist` in `kicad_interface.py` to pass `schematic_path`.
- `server.ts`: Fix KiCAD bundled Python (3.11.5) not being selected on Windows – the
  detection condition `process.env.PYTHONPATH?.includes("KiCad")` was fragile and failed
  in some environments, causing System Python 3.12 to be used instead. Since `pcbnew.pyd`
  is compiled for KiCAD's Python 3.11.5, this resulted in `No module named 'pcbnew'`.
  Fix: removed the condition, KiCAD bundled Python is now always preferred on Windows
  when it exists at `C:\Program Files\KiCad\9.0\bin\python.exe`.
  Also added `KICAD_PYTHON` to `claude_desktop_config.json` as explicit override.
- `pin_locator.py`: Fix `generate_netlist` timeout – `get_pin_location` and
  `get_all_symbol_pins` called `Schematic(schematic_path)` on every single pin lookup,
  causing O(nets × components × pins) schematic file loads (e.g. 400+ loads for a
  medium schematic). Fix: added `_schematic_cache` dict to `PinLocator.__init__`,
  schematic is now loaded once per path and reused.

---

## [2.1.0-alpha] - 2026-01-10

### Phase 1: Intelligent Schematic Wiring System - Core Infrastructure

**Major Features:**

- Automatic pin location discovery with rotation support
- Smart wire routing (direct, orthogonal horizontal/vertical)
- Net label management (local, global, hierarchical)
- S-expression-based wire creation
- Professional right-angle routing

**New Components:**

- `python/commands/wire_manager.py` - S-expression wire creation engine
- `python/commands/pin_locator.py` - Intelligent pin discovery with rotation
- Updated `python/commands/connection_schematic.py` - High-level connection API
- `docs/SCHEMATIC_WIRING_PLAN.md` - Implementation roadmap

**MCP Tools Enhanced:**

- `add_schematic_wire` - Create wires with stroke customization
- `add_schematic_connection` - Auto-connect pins with routing options (NEW)
- `add_schematic_net_label` - Add labels with type and orientation control (NEW)
- `connect_to_net` - Connect pins to named nets (ENHANCED)

**Technical Implementation:**

- Rotation transformation matrix for pin coordinates
- S-expression injection for guaranteed format compliance
- Pin definition caching for performance
- Orthogonal path generation for professional schematics

**Testing:**

- End-to-end integration test: 100% passing
- MCP handler integration test: 100% passing
- Pin discovery with rotation: Verified working
- KiCad-skip verification: All wires/labels correctly formed

---

### Phase 2: Power Nets & Wire Connectivity - COMPLETE

**Major Features:**

- Power symbol support (VCC, GND, +3V3, +5V, etc.) via dynamic loading
- Wire graph analysis for net connectivity tracking
- Geometric wire tracing with tolerance-based point matching
- Accurate netlist generation with component/pin connections
- Critical template mapping bug fixes

**Updates:**

- `connect_to_net()` - Migrated to WireManager + PinLocator
- `get_net_connections()` - Complete rewrite with geometric wire tracing
- `generate_netlist()` - Now uses wire graph analysis for connectivity
- `get_or_create_template()` - Fixed special character handling, auto-reload after dynamic loading
- `add_component()` - Fixed template lookup with symbol iteration

**Bug Fixes:**

- CRITICAL: Template mapping after dynamic symbol loading
- Special character handling in symbol names (+ prefix in +3V3, +5V)
- Schematic reload synchronization after S-expression injection
- Multi-format template reference detection

**Wire Graph Analysis Algorithm:**

1. Find all labels matching target net name
2. Trace wires connected to label positions (point coincidence)
3. Collect all wire endpoints and polyline segments
4. Match component pins at wire connection points using PinLocator
5. Return accurate component/pin connection pairs

**Technical Implementation:**

- Tolerance-based point matching (0.5mm for grid alignment)
- Multi-segment wire (polyline) support
- Rotation-aware pin location matching via PinLocator
- Fallback proximity detection (10mm threshold)
- Template existence checking via symbol iteration (handles special characters)

**Testing:**

- Power symbols: 4/4 loaded (VCC, GND, +3V3, +5V)
- Components: 4/4 placed
- Connections: 8/8 created successfully
- Net connectivity: 100% accurate (VCC: 2, GND: 4, +3V3: 1, +5V: 1)
- Netlist generation: 4 nets with accurate connections
- Comprehensive integration test: 100% PASSING

**Commits:**

- `c67f400` - Updated connect_to_net to use WireManager
- `b77f008` - Fixed template mapping bug (critical)
- `a5a542b` - Implemented wire graph analysis

**Addresses:**

- Issue #26 - Schematic workflow wiring functionality (Phase 2)

---

### Phase 2: JLCPCB Integration Complete

**Major Features:**

- ✅ Complete JLCPCB parts integration via JLCSearch public API
- ✅ Access to ~100k JLCPCB parts catalog
- ✅ Real-time stock and pricing data
- ✅ Parametric component search
- ✅ Cost optimization (Basic vs Extended library)
- ✅ KiCad footprint mapping
- ✅ Alternative part suggestions

**New Components:**

- `python/commands/jlcsearch.py` - JLCSearch API client (no auth required)
- `python/commands/jlcpcb_parts.py` - Enhanced with `import_jlcsearch_parts()`
- `docs/JLCPCB_INTEGRATION.md` - Comprehensive integration guide

**MCP Tools Available:**

- `download_jlcpcb_database` - Download full parts catalog
- `search_jlcpcb_parts` - Parametric search with filters
- `get_jlcpcb_part` - Part details + footprint suggestions
- `get_jlcpcb_database_stats` - Database statistics
- `suggest_jlcpcb_alternatives` - Find similar/cheaper parts

**Technical Improvements:**

- SQLite database with full-text search (FTS5)
- Package-to-footprint mapping for standard SMD packages
- Price comparison and cost optimization algorithms
- HMAC-SHA256 authentication support (for official JLCPCB API)

**Testing:**

- All integration tests passing
- Database operations validated
- Live API connectivity confirmed
- End-to-end MCP tool testing complete

**Documentation:**

- Complete API reference with examples
- Package mapping tables (0402, 0603, 0805, SOT-23, etc.)
- Best practices guide
- Troubleshooting section

---

## [2.1.0-alpha] - 2025-11-30

### Phase 1: Schematic Workflow Fix

**Critical Bug Fix:**

- ✅ Fixed completely broken schematic workflow (Issue #26)
- Created template-based symbol cloning approach
- All schematic tests now passing

**Root Cause:**

- kicad-skip library limitation: cannot create symbols from scratch, only clone existing ones

**Solution:**

- Template schematic with cloneable R, C, LED symbols
- Updated `create_project` to create both PCB and schematic
- Rewrote `add_schematic_component` to use `clone()` API
- Proper UUID generation and position setting

**Files Modified:**

- `python/commands/project.py` - Now creates schematic files
- `python/commands/schematic.py` - Uses template approach
- `python/commands/component_schematic.py` - Complete rewrite

**Files Created:**

- `python/templates/template_with_symbols.kicad_sch`
- `python/templates/empty.kicad_sch`
- `docs/SCHEMATIC_WORKFLOW_FIX.md`

**Testing:**

- Created comprehensive test suite
- All 7 tests passing
- KiCad CLI validation successful

---

## [2.0.0-alpha] - 2025-11-05

### Router Pattern & Tool Organization

**Major Architecture Change:**

- Implemented tool router pattern (70% context reduction)
- 12 direct tools, 47 routed tools in 7 categories
- Smart tool discovery system

**New Router Tools:**

- `list_tool_categories` - Browse available categories
- `get_category_tools` - View tools in category
- `search_tools` - Find tools by keyword
- `execute_tool` - Run any routed tool

**Benefits:**

- Dramatically reduced AI context usage
- Maintained full functionality (64 tools)
- Improved tool discoverability
- Better organization for users

---

## [2.0.0-alpha] - 2025-11-01

### IPC Backend Integration

**Experimental Feature:**

- KiCad 9.0 IPC API integration for real-time UI sync
- Changes appear immediately in KiCad (no manual reload)
- Hybrid backend: IPC + SWIG fallback
- 20+ commands with IPC support

**Implementation:**

- Routing operations (interactive push-and-shove)
- Component placement and modification
- Zone operations and fills
- DRC and verification

**Status:**

- Under active development
- Enable via KiCad: Preferences > Plugins > Enable IPC API Server
- Automatic fallback to SWIG when IPC unavailable

---

## [2.0.0-alpha] - 2025-10-26

### Initial JLCPCB Integration (Local Libraries)

**Features:**

- Local JLCPCB symbol library search
- Integration with KiCad Plugin and Content Manager
- Search by LCSC part number, manufacturer, description

**Credit:**

- Contributed by [@l3wi](https://github.com/l3wi)

**Components:**

- `python/commands/symbol_library.py`
- Basic library search functionality

---

## [1.0.0] - 2025-10-01

### Initial Release

**Core Features:**

- 64 fully-documented MCP tools
- JSON Schema validation for all tools
- 8 dynamic resources for project state
- Cross-platform support (Linux, Windows, macOS)
- Comprehensive error handling
- Detailed logging

**Tool Categories:**

- Project Management (4 tools)
- Board Operations (9 tools)
- Component Management (8 tools)
- Routing (6 tools)
- Export & Manufacturing (5 tools)
- Design Rule Checking (4 tools)
- Schematic Operations (6 tools)
- Symbol Library (3 tools)
- JLCPCB Integration (5 tools)

**Platform Support:**

- Linux (KiCad 7.x, 8.x, 9.x)
- Windows (KiCad 9.x)
- macOS (KiCad 9.x)

**Documentation:**

- Complete README with setup instructions
- Platform-specific guides
- Tool reference documentation
- Contributing guidelines

---

## Version Numbering

- **2.1.0-alpha**: Current development version with JLCPCB integration
- **2.0.0-alpha**: Router pattern and IPC backend
- **1.0.0**: Initial stable release

## Breaking Changes

### 2.1.0-alpha

- None (additive changes only)

### 2.0.0-alpha

- Tool execution now requires router for 47 tools
- Direct tool access limited to 12 high-frequency tools
- Schema validation stricter (catches errors earlier)

## Deprecations

### 2.1.0-alpha

- `docs/JLCPCB_USAGE_GUIDE.md` - Superseded by `docs/JLCPCB_INTEGRATION.md`
- `docs/JLCPCB_INTEGRATION_PLAN.md` - Implementation complete

## Migration Guide

### Upgrading to 2.1.0-alpha from 2.0.0-alpha

**New Dependencies:**

- No new system dependencies
- Python packages: `requests` (already in requirements.txt)

**Database Setup:**

1. Run `download_jlcpcb_database` tool (one-time, ~5-10 minutes)
2. Database created at `data/jlcpcb_parts.db`
3. Subsequent searches use local database (instant)

**API Changes:**

- All existing tools remain compatible
- 5 new JLCPCB tools available
- No breaking changes to existing functionality

### Upgrading to 2.0.0-alpha from 1.0.0

**Router Pattern:**

- Some tools now accessed via `execute_tool` instead of direct calls
- Use `list_tool_categories` to discover available tools
- Search with `search_tools` to find specific functionality

**IPC Backend (Optional):**

- Enable in KiCad: Preferences > Plugins > Enable IPC API Server
- Set `KICAD_BACKEND=ipc` environment variable
- Falls back to SWIG if unavailable

---

## Credits

- **JLCSearch API**: [@tscircuit](https://github.com/tscircuit/jlcsearch)
- **JLCParts Database**: [@yaqwsx](https://github.com/yaqwsx/jlcparts)
- **Local JLCPCB Search**: [@l3wi](https://github.com/l3wi)
- **KiCad**: KiCad Development Team
- **MCP Protocol**: Anthropic

## License

See LICENSE file for details.