nearxos
71dd98f2f8
- Schematic rebuilt with MCP batch_add_and_connect (23 components, 17 nets) - Board outline: 65×40mm, 2-layer, JLCPCB DRC rules (0.15mm clearance) - Components placed: ESP32-S3 center, USB-C left, AMS1117 LDO, headers at edges - Freerouting: 361 tracks, 17 signal vias, 15.7s autoroute - GND copper pour on F.Cu + B.Cu, 77 stitching vias - DRC: 208 violations (77 via_dangling = zone fill artifacts, resolve on KiCad GUI fill) - Gerbers + drill + BOM + pick-and-place exported to gerbers/ - Netlist verified: 20 components, 16 nets all properly connected
15 lines
794 B
CSV
15 lines
794 B
CSV
value,footprint,quantity,references
|
|
AMS1117-3.3,Package_TO_SOT_SMD:SOT-223-3_TabPin2,1,['U2']
|
|
USB-C,Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12,1,['J1']
|
|
100nF,Capacitor_SMD:C_0603_1608Metric,3,"['C2', 'C1', 'C4']"
|
|
10uF,Capacitor_SMD:C_0805_2012Metric,2,"['C6', 'C5']"
|
|
LED_Green,LED_SMD:LED_0603_1608Metric,1,['D1']
|
|
470,Resistor_SMD:R_0603_1608Metric,1,['R1']
|
|
PROG,Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical,1,['J3']
|
|
10k,Resistor_SMD:R_0603_1608Metric,3,"['R2', 'R3', 'R4']"
|
|
5.1k,Resistor_SMD:R_0603_1608Metric,2,"['R7', 'R8']"
|
|
ESP32-S3-WROOM-1,RF_Module:ESP32-S3-WROOM-1,1,['U1']
|
|
10uF,Capacitor_SMD:C_0603_1608Metric,1,['C3']
|
|
4.7k,Resistor_SMD:R_0603_1608Metric,2,"['R6', 'R5']"
|
|
I2C_Sensor,Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical,1,['J2']
|