nearxos
541fad9b28
- Major cleanup: GND traces/stitching vias removed from U1 keepout area - Re-exported all fabrication files via kicad-cli - Gerbers: F.Cu, B.Cu, F/B.Mask, F/B.SilkS, F/B.Paste, Edge.Cuts - Drill file: Excellon format - BOM: 20 components, CSV formatted - Pick-and-place: CSV, mm units, both sides - DRC: 82 violations (zone-fill artifacts + edge clearance) - 21 unconnected (GND vias needing zone fill - restore via SES import) - All files in gerbers-v2/ - Netlist verified: 20 components, 17 nets connected
22 lines
1.2 KiB
CSV
22 lines
1.2 KiB
CSV
"Refs","Value","Footprint","Qty","DNP"
|
|
"C1","100nF","Capacitor_SMD:C_0603_1608Metric","1",""
|
|
"C2","100nF","Capacitor_SMD:C_0603_1608Metric","1",""
|
|
"C3","10uF","Capacitor_SMD:C_0603_1608Metric","1",""
|
|
"C4","100nF","Capacitor_SMD:C_0603_1608Metric","1",""
|
|
"C5","10uF","Capacitor_SMD:C_0805_2012Metric","1",""
|
|
"C6","10uF","Capacitor_SMD:C_0805_2012Metric","1",""
|
|
"D1","LED_Green","LED_SMD:LED_0603_1608Metric","1",""
|
|
"J1","USB-C","Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12","1",""
|
|
"J2","I2C_Sensor","Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical","1",""
|
|
"J3","PROG","Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical","1",""
|
|
"R1","470","Resistor_SMD:R_0603_1608Metric","1",""
|
|
"R2","10k","Resistor_SMD:R_0603_1608Metric","1",""
|
|
"R3","10k","Resistor_SMD:R_0603_1608Metric","1",""
|
|
"R4","10k","Resistor_SMD:R_0603_1608Metric","1",""
|
|
"R5","4.7k","Resistor_SMD:R_0603_1608Metric","1",""
|
|
"R6","4.7k","Resistor_SMD:R_0603_1608Metric","1",""
|
|
"R7","5.1k","Resistor_SMD:R_0603_1608Metric","1",""
|
|
"R8","5.1k","Resistor_SMD:R_0603_1608Metric","1",""
|
|
"U1","ESP32-S3-WROOM-1","RF_Module:ESP32-S3-WROOM-1","1",""
|
|
"U2","AMS1117-3.3","Package_TO_SOT_SMD:SOT-223-3_TabPin2","1",""
|