nearxos/ESP_Midea
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
main
ESP_Midea/Midea_ESP/COMPONENT_SIZES.md
nearxos cf6e6e3baf Initial KiCad project
2026-01-06 02:05:24 +02:00

10 KiB
Raw Permalink Blame History

Component Package Size Recommendations

This guide provides recommended package sizes for all components in the Midea AC Controller PCB design.

General Recommendations

For Hand Assembly (Prototyping):

  • Use 0805 (2.0mm × 1.25mm) or larger for passive components
  • Easier to solder manually
  • Better for low-volume production

For Automated Assembly (Production):

  • Use 0603 (1.6mm × 0.8mm) or 0402 (1.0mm × 0.5mm)
  • Smaller board size
  • Lower cost in volume
  • Requires pick-and-place machine

Recommended for this project: 0805 (good balance of size, cost, and ease of assembly)

Capacitors

Power Supply Capacitors (C1, C2: 10µF)

Component Value Recommended Package Alternative Notes
C1, C2 10µF 0805 (2.0×1.25mm) 0603, 1206 Ceramic, X7R or X5R, 16V or higher
Footprint: Capacitor_SMD:C_0805_2012Metric

Part Number Examples:

  • 0805: CL21A106KAYNNNE (Samsung), GRM21BR71C106KE15L (Murata)
  • 0603: CL10B106KB8NNNC (Samsung) - smaller but harder to hand solder
  • 1206: CL31A106KAHNNNE (Samsung) - larger, easier to hand solder

Voltage Rating: 16V minimum (for 5V input with margin)

Decoupling Capacitors (C3, C4, C5-C13: 100nF)

Component Value Recommended Package Alternative Notes
C3, C4, C5-C13 100nF (0.1µF) 0805 (2.0×1.25mm) 0603, 0402 Ceramic, X7R, 16V or higher
Footprint: Capacitor_SMD:C_0805_2012Metric

Part Number Examples:

  • 0805: CL21B104KBCNNNC (Samsung), GRM21BR71H104KA01L (Murata)
  • 0603: CL10B104KA8NNNC (Samsung)
  • 0402: CL05B104KA5NNNC (Samsung) - very small, difficult to hand solder

Voltage Rating: 16V minimum

Recommendation: Use 0805 for all decoupling capacitors - standard size, easy to source, good for hand assembly.

Resistors

LED Current Limiting Resistors (R1, R2: 220Ω)

Component Value Recommended Package Alternative Notes
R1, R2 220Ω 0805 (2.0×1.25mm) 0603, 1206 1/8W or 1/10W rating
Footprint: Resistor_SMD:R_0805_2012Metric

Part Number Examples:

  • 0805: RC0805FR-07220RL (Yageo), ERJ-6GEYJ221V (Panasonic)
  • 0603: RC0603FR-07220RL (Yageo)
  • 1206: RC1206FR-07220RL (Yageo) - larger, easier to hand solder

Power Rating: 1/8W (0.125W) or 1/10W (0.1W) is sufficient

  • At 3.3V: P = V²/R = 3.3²/220 = 0.049W (well within rating)

Tolerance: ±5% (E24 series) or ±1% (E96 series)

Pull-up Resistors (R3, R4, R5, R6: 10kΩ)

Component Value Recommended Package Alternative Notes
R3, R4, R5, R6 10kΩ 0805 (2.0×1.25mm) 0603, 1206 1/8W or 1/10W rating
Footprint: Resistor_SMD:R_0805_2012Metric

Part Number Examples:

  • 0805: RC0805FR-0710KL (Yageo), ERJ-6GEYJ103V (Panasonic)
  • 0603: RC0603FR-0710KL (Yageo)
  • 1206: RC1206FR-0710KL (Yageo)

Power Rating: 1/8W (0.125W) or 1/10W (0.1W) is sufficient

  • At 3.3V: P = V²/R = 3.3²/10000 = 0.001W (very low power)

Tolerance: ±5% (E24 series) is sufficient for pull-ups

LEDs

Component Type Recommended Package Alternative Notes
LED1, LED2 LED 0805 (2.0×1.25mm) 0603, 1206 Red or Green, 20mA forward current
Footprint: LED_SMD:LED_0805_2012Metric

Part Number Examples:

  • 0805:
    • Red: LTST-C170KFKT (Lite-On), L-7113HD (Kingbright)
    • Green: LTST-C170KGKT (Lite-On), L-7113GD (Kingbright)
  • 0603: Smaller, harder to see and hand solder
  • 1206: Larger, brighter, easier to see

Specifications:

  • Forward Voltage: 2.0-2.2V (Red), 3.0-3.2V (Green)
  • Forward Current: 20mA typical
  • With 220Ω resistor at 3.3V: I = (3.3V - 2.0V) / 220Ω = 5.9mA (safe, visible)

Recommendation: Use 0805 - good visibility, easy to solder, standard size.

Buttons (Switches)

Component Type Recommended Package Alternative Notes
SW1, SW2 Tactile Switch 6×6mm 4×4mm, 12×12mm Through-hole or SMD
Footprint: Button_Switch_SMD:SW_SPST_Tactile_6.0x6.0mm

Part Number Examples:

  • 6×6mm SMD: B3SN-3112P (Omron), KMR2 (C&K)
  • 6×6mm THT: B3F-4055 (Omron), KMR2 (C&K)
  • 4×4mm: Smaller, harder to press
  • 12×12mm: Larger, easier to press

Specifications:

  • Actuation Force: 2.55N (260gf) typical
  • Travel: 0.25mm typical
  • Life: 100,000+ cycles

Recommendation: Use 6×6mm - good size for finger pressing, common footprint.

Voltage Regulator (U1: AMS1117-3.3)

Component Type Package Footprint Notes
U1 AMS1117-3.3 SOT-223 Package_TO_SOT_SMD:SOT-223 1A LDO regulator

Package Dimensions:

  • Body: 6.5mm × 3.5mm
  • Height: 1.6mm
  • Lead pitch: 2.3mm

Part Number Examples:

  • AMS1117-3.3 (Advanced Monolithic Systems)
  • LM1117-3.3 (Texas Instruments) - pin-compatible alternative

Thermal Considerations:

  • Maximum power dissipation: ~1W (depends on heatsinking)
  • At 5V input, 3.3V output, 500mA: P = (5-3.3) × 0.5 = 0.85W
  • The large tab helps with heat dissipation

Recommendation: SOT-223 is standard and appropriate for this application.

Level Shifter (U3: TXB0104PWR)

Component Type Package Footprint Notes
U3 TXB0104PWR TSSOP-14 Package_SO:TSSOP-14_4.4x5mm_P0.65mm 4-channel level shifter

Package Dimensions:

  • Body: 5.0mm × 4.4mm
  • Height: 1.2mm
  • Lead pitch: 0.65mm (fine pitch)

Part Number:

  • TXB0104PWR (Texas Instruments)

Assembly Note:

  • Fine pitch (0.65mm) requires careful soldering
  • Consider using hot air rework station or reflow oven
  • Can be hand soldered with fine tip and flux

Recommendation: TSSOP-14 is the standard package for this part.

ESP32 Module (U2: ESP32-WROOM-32E)

Component Type Package Footprint Notes
U2 ESP32-WROOM-32E 38-pin QFN Custom footprint required ESP32 module

Package Dimensions:

  • Body: 18mm × 25.5mm × 3.1mm
  • Pin pitch: 1.27mm (0.05")
  • 38 pins total

Footprint:

  • You'll need to create a custom footprint or use an existing ESP32-WROOM footprint
  • Common footprint libraries may have this

Assembly Note:

  • Requires reflow soldering (hot air or reflow oven)
  • Can be hand soldered with hot air rework station
  • Bottom pad needs to be soldered for proper thermal and electrical connection

Recommendation: Use the official Espressif footprint or create custom footprint based on datasheet.

Connectors

J1: JST-XH Connector (4-pin)

Component Type Package Footprint Notes
J1 JST-XH 4-pin JST-XH-B4B-XH-A Connector_JST:JST_XH_B4B-XH-A 2.5mm pitch

Package Dimensions:

  • Pitch: 2.5mm
  • Height: ~8mm
  • Through-hole mounting

Part Number:

  • B4B-XH-A (JST) - Female connector (receptacle on PCB)
  • Matching cable connector: B4B-XH-A-1 (with cable)

Recommendation: Standard JST-XH footprint, through-hole for mechanical strength.

J2: Programming Header (6-pin)

Component Type Package Footprint Notes
J2 Pin Header 2.54mm pitch Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical Standard 0.1" pitch

Package Dimensions:

  • Pitch: 2.54mm (0.1")
  • Height: 8.5mm typical (can vary)
  • Through-hole mounting

Part Number Examples:

  • Generic pin headers available from many manufacturers
  • Can use straight or right-angle headers
  • Consider using shrouded header for keyed connection

Recommendation: Standard 2.54mm pitch header - very common, easy to source.

Summary Table

Component Type Recommended Package Size Assembly Difficulty
Capacitors (10µF) 0805 2.0×1.25mm Easy
Capacitors (100nF) 0805 2.0×1.25mm Easy
Resistors (all) 0805 2.0×1.25mm Easy
LEDs 0805 2.0×1.25mm Easy
Buttons 6×6mm 6×6mm Easy
AMS1117-3.3 SOT-223 6.5×3.5mm Medium
TXB0104PWR TSSOP-14 5.0×4.4mm Medium (fine pitch)
ESP32-WROOM-32E QFN-38 18×25.5mm Hard (requires reflow)
JST-XH Connector Through-hole 2.5mm pitch Easy
Programming Header Through-hole 2.54mm pitch Easy

Manufacturing Considerations

For Hand Assembly (Prototyping):

  • Use 0805 for all passives (capacitors, resistors)
  • Use through-hole connectors where possible
  • Use 6×6mm buttons
  • ESP32 may require hot air rework station

For Automated Assembly (Production):

  • Can use 0603 or 0402 for passives (smaller, cheaper)
  • All SMD components work with pick-and-place
  • Reduces board size
  • Lower cost in volume

Recommended for This Project:

  • 0805 for all passive components - good balance
  • Standard through-hole connectors
  • Standard SMD packages for ICs

KiCad Footprint Library References

When assigning footprints in KiCad, use these library paths:

  • Capacitors (0805): Capacitor_SMD:C_0805_2012Metric
  • Resistors (0805): Resistor_SMD:R_0805_2012Metric
  • LEDs (0805): LED_SMD:LED_0805_2012Metric
  • Buttons (6×6mm): Button_Switch_SMD:SW_SPST_Tactile_6.0x6.0mm
  • AMS1117-3.3: Package_TO_SOT_SMD:SOT-223
  • TXB0104PWR: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • JST-XH: Connector_JST:JST_XH_B4B-XH-A
  • Programming Header: Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical

Cost Considerations

Package Size vs Cost (typical, per 1000 units):

  • 0402: Lowest cost, smallest size
  • 0603: Low cost, small size
  • 0805: Moderate cost, good size (recommended)
  • 1206: Higher cost, larger size

For this project: 0805 is the sweet spot - not too expensive, not too hard to assemble.

Availability

All recommended packages are:

  • Widely available from major distributors (Digi-Key, Mouser, LCSC, etc.)
  • Standard sizes used across the industry
  • Well-documented with datasheets and application notes
  • Compatible with standard PCB manufacturing processes