# Network boot on the provisioning LXC (eth1 = LAN, eth0 = WAN)

The provisioning LXC can provide **network boot** (PXE-style) and **internet access** to devices connected on **eth1**, while **eth0** is used as WAN for the LXC itself.

## Roles

| Interface | Role | Typical config |
|-----------|------|-----------------|
| **eth0** | WAN | DHCP or static; default route; internet for the LXC |
| **eth1** | LAN (provisioning) | Static e.g. `10.20.50.1/24`; DHCP server + TFTP server; NAT so clients get internet via eth0 |

Devices plugged into the same network as **eth1** (e.g. reTerminals with network boot enabled) will:

1. Get an IP via **DHCP** (from the LXC on eth1).
2. Get **TFTP** boot files (Raspberry Pi firmware: `start4.elf`, `fixup4.dat`, kernel, etc.) for network boot.
3. Have **internet** via NAT through the LXC (eth0).

## What you need on the LXC

1. **DHCP server** on eth1 only (e.g. **dnsmasq**), handing out addresses in e.g. `10.20.50.100`–`10.20.50.200` and advertising the TFTP server (next-server = LXC’s eth1 IP).
2. **TFTP server** (dnsmasq can provide this) with **TFTP root** containing Raspberry Pi 4 / CM4 boot files.
3. **IP forwarding** and **NAT** (nftables or iptables) so traffic from `10.20.50.0/24` is masqueraded out **eth0**.

## One-time setup (inside the LXC)

From your machine, run the setup script **on the LXC** (replace with your LXC IP if different):

```bash
# From the repo (script runs inside the LXC)
./emmc-provisioning/scripts/setup-network-boot-on-lxc.sh root@10.130.60.141
```

Or SSH into the LXC and run the script there:

```bash
ssh root@10.130.60.141
# Copy or rsync the emmc-provisioning tree into the container, then:
bash /path/to/setup-network-boot-on-lxc.sh
```

The script will:

- Install **dnsmasq** (DHCP + TFTP).
- Configure dnsmasq to listen only on **eth1**, with a DHCP range and TFTP root.
- Create `/srv/tftpboot` and **fetch Raspberry Pi 4 boot files from GitHub** (raspberrypi/firmware, `boot/` folder) if not already present.
- Enable **IPv4 forwarding** and **NAT** (nftables) so clients on eth1 use eth0 for internet.
- Enable and start the **dnsmasq** service.

## Proxmox: adding eth1 to the LXC

If you create the container by hand or want a second interface:

1. On the **Proxmox host**, add a second network device to the container, e.g.:
   ```bash
   pct set <CTID> --net1 name=eth1,bridge=vmbr1,ip=10.20.50.1/24
   ```
   Use the bridge that corresponds to the physical LAN where reTerminals are connected (e.g. `vmbr1` or a dedicated provisioning bridge).

2. Inside the LXC, ensure **eth1** has a static address (e.g. in `/etc/network/interfaces`):
   ```
   auto eth1
   iface eth1 inet static
       address 10.20.50.1/24
   ```

Your current LXC already has eth0 (10.130.60.141) and eth1 (10.20.50.1); the setup script only adds DHCP, TFTP, and NAT.

## After setup: reTerminal network boot

1. Set the reTerminal **boot order** to try eMMC first, then network (e.g. `BOOT_ORDER=0xf21`): use the dashboard **Update EEPROM** when the device is connected via USB boot, or set manually (usbboot recovery / `rpi-eeprom-config` on device). Not set by first-boot.
2. Connect the reTerminal to the **same network as the LXC’s eth1** (e.g. 10.20.50.0/24).
3. Power on; it will get an IP via DHCP and load boot files via TFTP from the LXC.
4. For **provisioning** (Backup/Deploy), the netboot environment must run **network-client/provisioning-client.sh** with `PROVISIONING_SERVER=http://10.20.50.1:5000` so it talks to the dashboard on the LXC.

## TFTP boot files (Raspberry Pi 4 / CM4)

The setup script **automatically downloads** the official Raspberry Pi firmware `boot/` folder from GitHub (https://github.com/raspberrypi/firmware) into `/srv/tftpboot` when `start4cd.elf` is missing. No manual copy is needed.

To refresh or populate TFTP without re-running the full setup:

```bash
./emmc-provisioning/scripts/populate-tftpboot-from-git.sh root@<LXC-IP>
```

(Remove `/srv/tftpboot/start4cd.elf` on the LXC first if you want a full re-fetch.)

The TFTP root contains e.g. `start4cd.elf`, `fixup4cd.dat`, `config.txt`, `cmdline.txt`, `kernel8.img`, and other boot files. For a custom kernel or initramfs (e.g. for provisioning), add or replace files in `/srv/tftpboot` and adjust `config.txt` / `cmdline.txt` as needed.

## DHCP leases

On the LXC, dnsmasq stores DHCP leases in **`/var/lib/misc/dnsmasq.leases`** (Debian/Ubuntu default). To see which devices got an IP on the provisioning LAN:

```bash
# On the LXC (or via SSH)
cat /var/lib/misc/dnsmasq.leases
```

Each line is: *expiry_epoch MAC IP hostname client_id*. Example: `1734567890 aa:bb:cc:dd:ee:ff 10.20.50.101 reterminal 01:aa:bb:cc:dd:ee:ff`

---

## Testing network boot

1. **Prerequisites**
   - reTerminal has **BOOT_ORDER=0xf21** (eMMC first, then network). Check on the device:  
     `ssh pi@<device-ip> 'bash -s' < emmc-provisioning/scripts/check-network-boot-priority.sh`
   - LXC network-boot options are **enabled**: on the LXC run  
     `/opt/cm4-provisioning/toggle-network-boot-dhcp.sh status` → should print `enabled`. If not: `toggle-network-boot-dhcp.sh enable`
   - reTerminal is on the **same LAN as the LXC’s eth1** (e.g. 10.20.50.0/24), Ethernet connected.

2. **Power cycle the reTerminal** (or reboot if it’s already running). It will request DHCP, get options 66/67 (TFTP server + boot file), then TFTP boot files from the LXC.

3. **What “working” looks like**
   - **On the LXC**: a new lease appears in `/var/lib/misc/dnsmasq.leases` (device MAC + IP in 10.20.50.x).
   - If the netboot environment runs **provisioning-client.sh** and registers with the dashboard: the device appears under **“Device detected (Network)”** on the dashboard (`http://<LXC-IP>:5000`), and you can choose Backup/Deploy.
   - If you only use “plain” Pi netboot (no custom initramfs/provisioning client): you just see the DHCP lease and the device loading files via TFTP; it may boot to a minimal kernel/initramfs or NFS root depending on your TFTP config.

4. **Quick test without a reTerminal**
   - From a Linux host on the same VLAN as eth1, run:  
     `sudo dhclient -v eth0` (or your interface) and check that you get an IP in 10.20.50.x and, if netboot is enabled, that the DHCP reply includes option 66 (next-server) and 67 (boot file).  
   - Or on the LXC run `tcpdump -i eth1 -n port 67 or port 68` and power on the reTerminal: you should see DHCP (Discover/Offer/Request/Ack) and then TFTP traffic.

---

## Monitoring on the LXC

| What to check | How |
|--------------|-----|
| **Network boot enabled?** | ` /opt/cm4-provisioning/toggle-network-boot-dhcp.sh status` → `enabled` or `disabled` |
| **DHCP leases** | `cat /var/lib/misc/dnsmasq.leases` — lists MAC, IP, hostname for devices that got an IP from dnsmasq on eth1 |
| **dnsmasq (DHCP/TFTP) running** | `systemctl status dnsmasq` or `service dnsmasq status` |
| **TFTP root present** | `ls -la /srv/tftpboot/` — should contain e.g. `start4cd.elf`, `fixup4cd.dat`, `config.txt`, `kernel8.img` |
| **Live DHCP/TFTP traffic** | `tcpdump -i eth1 -n port 67 or port 68 or port 69` (67/68 = DHCP, 69 = TFTP). Run while powering on a device. |
| **Dashboard – network devices** | Open `http://<LXC-IP>:5000`; under “Device detected (Network)” you see devices that have called `POST /api/register-device` (only if your netboot environment runs the provisioning client). |
| **Registered devices (raw)** | `cat /var/lib/cm4-provisioning/network_devices.json` (if the dashboard uses default path) — list of MAC, IP, action. |

Optional: enable dnsmasq query logging to see every DHCP request. Add to a config in `/etc/dnsmasq.d/` (e.g. `log-queries.conf`): `log-queries` and `log-facility=/var/log/dnsmasq.log`, then create the log file and `systemctl reload dnsmasq`. Check your distro’s dnsmasq doc for log location.

---

## Summary

| Component    | Where  | Purpose |
|-------------|--------|--------|
| eth0        | LXC    | WAN; LXC’s internet |
| eth1        | LXC    | LAN; 10.20.50.1/24; DHCP + TFTP |
| dnsmasq     | LXC    | DHCP (on eth1) + TFTP |
| TFTP root   | LXC    | e.g. `/srv/tftpboot` with RPi boot files |
| NAT         | LXC    | 10.20.50.0/24 → eth0 so LAN has internet |