CM4 eMMC Provisioning

Choose one:

USB boot mode

1. 1 Set the reTerminal to boot mode: fit the eMMC disable jumper (e.g. J2 / nRPIBOOT).
2. 2 Connect the reTerminal’s USB slave port to the Proxmox host. Power on. The device will appear in “Device detected” below; choose Backup or Deploy.
3. 3 When done, remove the jumper and power cycle so it boots from eMMC.

Network boot

1. 1 Enable network boot on the CM4 (e.g. BOOT_ORDER=0x21) and ensure it can reach this server.
2. 2 Boot the device over the network with an environment that runs the provisioning client (register + poll for action). It will show under “Device detected (Network)”. Choose Backup or Deploy.

When a device is detected (USB boot mode or network boot), it will appear below. Choose Backup to save its eMMC to a file, or Deploy to write the golden image to it.

No device waiting. Connect a reTerminal in USB boot mode, or ensure a network-booted device has registered.

Saved backups

No backups yet.

Recent flash log