nearxos/reterminal-dm4
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Refactor first-boot script and documentation to remove rpi-eeprom handling

Browse Source 
Eliminate the rpi-eeprom configuration steps from the first-boot script, simplifying the installation process. Update the documentation to clarify that the EEPROM boot order is now set via the dashboard or manually, rather than during first boot. Adjust package installation logs to reflect the removal of rpi-eeprom and ensure clarity in the installation process. Enhance overall documentation to guide users on the new EEPROM update methods.
This commit is contained in:
nearxos
2026-02-21 17:04:37 +02:00
parent a915e5a405
commit 595ae0dd35
5 changed files with 11 additions and 122 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
emmc-provisioning/docs/NETWORK-BOOT-DEPLOYMENT-FLOW.md
View File

@@ -6,7 +6,7 @@ This describes the full flow from power-on to eMMC deploy/backup when using **ne
## Overview
1. **reTerminal** is set to try **eMMC first, then network** (EEPROM `BOOT_ORDER=0xf21`).
1. **reTerminal** is set to try **eMMC first, then network** (EEPROM `BOOT_ORDER=0xf21`) via the dashboard **Update EEPROM** when the device is connected over USB boot, or set manually.
2. It is connected to the **same LAN as the LXC’s eth1** (e.g. 10.20.50.0/24).
3. On power-on it gets an IP via **DHCP** and loads **boot files via TFTP** from the LXC.
4. The **netboot environment** (kernel + rootfs) runs **provisioning-client.sh**, which registers with the **dashboard** and polls for an action.
@@ -29,7 +29,7 @@ The **dashboard** (Flask) runs in the LXC and is reachable at e.g. `http://10.20
### 2. reTerminal (device)
- **EEPROM**: `BOOT_ORDER=0xf21` (eMMC first, then network). Can be set by cloud-init first-boot on an already-flashed device.
- **EEPROM**: `BOOT_ORDER=0xf21` (eMMC first, then network). Set via dashboard **Update EEPROM** (USB boot) or manually (usbboot recovery / `rpi-eeprom-config` on device). Not set by first-boot.
- **Network**: Ethernet connected to the same segment as the LXC’s **eth1** (e.g. same switch/VLAN as 10.20.50.0/24).
- On **power-on**:
1. Pi 4/CM4 firmware does **DHCP** on the wired interface.