{
  "board": "/Users/nearxos/Documents/KiCad/10.0/esp32-s3-sensor-node/esp32-s3-sensor-node.kicad_pcb",
  "timestamp": "2026-06-22T21:29:25",
  "total_violations": 140,
  "violation_counts": {
    "items_not_allowed": 40,
    "clearance": 3,
    "shorting_items": 7,
    "zones_intersect": 2,
    "courtyards_overlap": 12,
    "pth_inside_courtyard": 4,
    "drill_out_of_range": 12,
    "starved_thermal": 4,
    "solder_mask_bridge": 7,
    "via_dangling": 21,
    "track_dangling": 1,
    "isolated_copper": 6,
    "silk_edge_clearance": 1,
    "holes_co_located": 2,
    "silk_overlap": 3,
    "silk_over_copper": 15
  },
  "severity_counts": {
    "error": 91,
    "warning": 49,
    "info": 0
  },
  "violations": [
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 15.0,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 15.0,
        "y": 15.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 15.0,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 25.0,
        "y": 15.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 58.0,
        "y": 15.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 20.0,
        "y": 13.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 35.0,
        "y": 3.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 17.0,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 53.0,
        "y": 15.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 20.0,
        "y": 3.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 58.0,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 30.0,
        "y": 15.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 15.0,
        "y": 13.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 30.0,
        "y": 3.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 30.0,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 30.0,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 53.0,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 35.0,
        "y": 13.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 20.0,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 48.0,
        "y": 15.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 20.0,
        "y": 15.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 15.0,
        "y": 3.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 17.0,
        "y": 15.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 25.0,
        "y": 3.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 30.0,
        "y": 13.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 35.0,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 48.0,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 20.0,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 25.0,
        "y": 13.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 25.0,
        "y": 3.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 25.0,
        "y": 5.54,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 25.0,
        "y": 8.08,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 25.0,
        "y": 10.62,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 25.0,
        "y": 3.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 15.175,
        "y": 7.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 16.825,
        "y": 7.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 16.0,
        "y": 7.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 15.175,
        "y": 12.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 16.825,
        "y": 12.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 16.0,
        "y": 12.0,
        "unit": "mm"
      }
    },
    {
      "type": "clearance",
      "severity": "error",
      "message": "Clearance violation ( clearance 0.2000 mm; actual 0.1650 mm)",
      "location": {
        "x": 47.175,
        "y": 22.0,
        "unit": "mm"
      }
    },
    {
      "type": "shorting_items",
      "severity": "error",
      "message": "Items shorting two nets (nets 3V3 and RXD0)",
      "location": {
        "x": 47.175,
        "y": 22.0,
        "unit": "mm"
      }
    },
    {
      "type": "shorting_items",
      "severity": "error",
      "message": "Items shorting two nets (nets 3V3 and NC)",
      "location": {
        "x": 29.225,
        "y": 25.0,
        "unit": "mm"
      }
    },
    {
      "type": "shorting_items",
      "severity": "error",
      "message": "Items shorting two nets (nets 3V3 and NC)",
      "location": {
        "x": 29.225,
        "y": 25.0,
        "unit": "mm"
      }
    },
    {
      "type": "shorting_items",
      "severity": "error",
      "message": "Items shorting two nets (nets 3V3 and NC)",
      "location": {
        "x": 47.175,
        "y": 24.0,
        "unit": "mm"
      }
    },
    {
      "type": "shorting_items",
      "severity": "error",
      "message": "Items shorting two nets (nets 3V3 and NC)",
      "location": {
        "x": 29.225,
        "y": 22.0,
        "unit": "mm"
      }
    },
    {
      "type": "clearance",
      "severity": "error",
      "message": "Clearance violation ( clearance 0.2000 mm; actual 0.1650 mm)",
      "location": {
        "x": 29.225,
        "y": 22.0,
        "unit": "mm"
      }
    },
    {
      "type": "shorting_items",
      "severity": "error",
      "message": "Items shorting two nets (nets 3V3 and NC)",
      "location": {
        "x": 47.175,
        "y": 24.0,
        "unit": "mm"
      }
    },
    {
      "type": "clearance",
      "severity": "error",
      "message": "Clearance violation ( clearance 0.2000 mm; actual 0.1750 mm)",
      "location": {
        "x": 29.225,
        "y": 28.0,
        "unit": "mm"
      }
    },
    {
      "type": "shorting_items",
      "severity": "error",
      "message": "Items shorting two nets (nets 3V3 and NC)",
      "location": {
        "x": 29.225,
        "y": 28.0,
        "unit": "mm"
      }
    },
    {
      "type": "zones_intersect",
      "severity": "error",
      "message": "Copper zones intersect (intersecting zones must have distinct priorities)",
      "location": {
        "x": -0.05,
        "y": -0.05,
        "unit": "mm"
      }
    },
    {
      "type": "zones_intersect",
      "severity": "error",
      "message": "Copper zones intersect (intersecting zones must have distinct priorities)",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 30.0,
        "y": 25.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 30.0,
        "y": 28.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 24.0,
        "y": 23.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 55.0,
        "y": 30.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 25.0,
        "y": 3.0,
        "unit": "mm"
      }
    },
    {
      "type": "pth_inside_courtyard",
      "severity": "error",
      "message": "PTH inside courtyard",
      "location": {
        "x": 25.0,
        "y": 3.0,
        "unit": "mm"
      }
    },
    {
      "type": "pth_inside_courtyard",
      "severity": "error",
      "message": "PTH inside courtyard",
      "location": {
        "x": 25.0,
        "y": 5.54,
        "unit": "mm"
      }
    },
    {
      "type": "pth_inside_courtyard",
      "severity": "error",
      "message": "PTH inside courtyard",
      "location": {
        "x": 25.0,
        "y": 8.08,
        "unit": "mm"
      }
    },
    {
      "type": "pth_inside_courtyard",
      "severity": "error",
      "message": "PTH inside courtyard",
      "location": {
        "x": 25.0,
        "y": 10.62,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 24.0,
        "y": 17.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 27.0,
        "y": 32.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 38.0,
        "y": 22.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 38.0,
        "y": 22.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 38.0,
        "y": 22.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 38.0,
        "y": 22.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 38.0,
        "y": 22.0,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.3000 mm; actual 0.2000 mm)",
      "location": {
        "x": 35.1,
        "y": 23.76,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.3000 mm; actual 0.2000 mm)",
      "location": {
        "x": 35.1,
        "y": 25.16,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.3000 mm; actual 0.2000 mm)",
      "location": {
        "x": 35.8,
        "y": 23.06,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.3000 mm; actual 0.2000 mm)",
      "location": {
        "x": 35.8,
        "y": 24.46,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.3000 mm; actual 0.2000 mm)",
      "location": {
        "x": 35.8,
        "y": 25.86,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.3000 mm; actual 0.2000 mm)",
      "location": {
        "x": 36.5,
        "y": 23.76,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.3000 mm; actual 0.2000 mm)",
      "location": {
        "x": 36.5,
        "y": 25.16,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.3000 mm; actual 0.2000 mm)",
      "location": {
        "x": 37.2,
        "y": 23.06,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.3000 mm; actual 0.2000 mm)",
      "location": {
        "x": 37.2,
        "y": 24.46,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.3000 mm; actual 0.2000 mm)",
      "location": {
        "x": 37.2,
        "y": 25.86,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.3000 mm; actual 0.2000 mm)",
      "location": {
        "x": 37.9,
        "y": 23.76,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.3000 mm; actual 0.2000 mm)",
      "location": {
        "x": 37.9,
        "y": 25.16,
        "unit": "mm"
      }
    },
    {
      "type": "starved_thermal",
      "severity": "error",
      "message": "Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "starved_thermal",
      "severity": "error",
      "message": "Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "starved_thermal",
      "severity": "error",
      "message": "Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "starved_thermal",
      "severity": "error",
      "message": "Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 46.75,
        "y": 24.36,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 29.225,
        "y": 25.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 46.75,
        "y": 23.09,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 29.225,
        "y": 25.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 29.25,
        "y": 21.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 46.75,
        "y": 21.82,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 29.225,
        "y": 28.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 15.0,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 15.0,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 20.0,
        "y": 13.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 35.0,
        "y": 3.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 17.0,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 20.0,
        "y": 3.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 58.0,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 15.0,
        "y": 13.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 30.0,
        "y": 3.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 30.0,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 30.0,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 53.0,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 35.0,
        "y": 13.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 20.0,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 15.0,
        "y": 3.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 25.0,
        "y": 3.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 30.0,
        "y": 13.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 35.0,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 48.0,
        "y": 10.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 20.0,
        "y": 8.0,
        "unit": "mm"
      }
    },
    {
      "type": "via_dangling",
      "severity": "warning",
      "message": "Via is not connected or connected on only one layer",
      "location": {
        "x": 25.0,
        "y": 13.0,
        "unit": "mm"
      }
    },
    {
      "type": "track_dangling",
      "severity": "warning",
      "message": "Track has unconnected end",
      "location": {
        "x": 29.25,
        "y": 31.98,
        "unit": "mm"
      }
    },
    {
      "type": "isolated_copper",
      "severity": "warning",
      "message": "Isolated copper fill",
      "location": {
        "x": -0.05,
        "y": -0.05,
        "unit": "mm"
      }
    },
    {
      "type": "isolated_copper",
      "severity": "warning",
      "message": "Isolated copper fill",
      "location": {
        "x": -0.05,
        "y": -0.05,
        "unit": "mm"
      }
    },
    {
      "type": "isolated_copper",
      "severity": "warning",
      "message": "Isolated copper fill",
      "location": {
        "x": -0.05,
        "y": -0.05,
        "unit": "mm"
      }
    },
    {
      "type": "isolated_copper",
      "severity": "warning",
      "message": "Isolated copper fill",
      "location": {
        "x": -0.05,
        "y": -0.05,
        "unit": "mm"
      }
    },
    {
      "type": "isolated_copper",
      "severity": "warning",
      "message": "Isolated copper fill",
      "location": {
        "x": -0.05,
        "y": -0.05,
        "unit": "mm"
      }
    },
    {
      "type": "isolated_copper",
      "severity": "warning",
      "message": "Isolated copper fill",
      "location": {
        "x": -0.05,
        "y": -0.05,
        "unit": "mm"
      }
    },
    {
      "type": "silk_edge_clearance",
      "severity": "warning",
      "message": "Silkscreen clipped by board edge",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "holes_co_located",
      "severity": "warning",
      "message": "Drilled holes co-located",
      "location": {
        "x": 25.0,
        "y": 3.0,
        "unit": "mm"
      }
    },
    {
      "type": "holes_co_located",
      "severity": "warning",
      "message": "Drilled holes co-located",
      "location": {
        "x": 25.0,
        "y": 3.0,
        "unit": "mm"
      }
    },
    {
      "type": "silk_overlap",
      "severity": "warning",
      "message": "Silkscreen clearance",
      "location": {
        "x": 48.0,
        "y": 22.57,
        "unit": "mm"
      }
    },
    {
      "type": "silk_overlap",
      "severity": "warning",
      "message": "Silkscreen clearance",
      "location": {
        "x": 11.7,
        "y": 22.0,
        "unit": "mm"
      }
    },
    {
      "type": "silk_overlap",
      "severity": "warning",
      "message": "Silkscreen clearance",
      "location": {
        "x": 2.3,
        "y": 23.9,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 30.0,
        "y": 23.57,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 30.0,
        "y": 23.57,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 24.0,
        "y": 21.32,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 30.0,
        "y": 20.57,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 29.85942,
        "y": 21.49,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 30.0,
        "y": 26.57,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 30.0,
        "y": 26.57,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 29.85942,
        "y": 28.51,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 29.85942,
        "y": 24.49,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 29.85942,
        "y": 25.51,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 48.0,
        "y": 20.57,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 48.0,
        "y": 22.57,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 48.0,
        "y": 22.57,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 48.0,
        "y": 22.57,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 48.0,
        "y": 22.57,
        "unit": "mm"
      }
    }
  ]
}