nearxos f26f15db61 feat(pcb): add 8-belt CNC router board — FluidNC YAML config + schematic netlist ...

- esp32-s3-pinout.yml: complete FluidNC machine config for 4×axis, 2-motors-per-axis (8 TMC2209, UART mode)
- schematic_netlist.md: component-level connection table (ESP32-S3, TMC2209, power, connectors, BOM)
- pins derived from Maslow 4 ESP32-S3 board layout adapted for 4-axis gantry
- TMC2209s on 2 UART buses (GPIO17/18), 4 addresses each, VREF resistor matrix

2026-06-20 16:15:25 +03:00

..

esp32-s3-pinout.yml

feat(pcb): add 8-belt CNC router board — FluidNC YAML config + schematic netlist

2026-06-20 16:15:25 +03:00

schematic_netlist.md

feat(pcb): add 8-belt CNC router board — FluidNC YAML config + schematic netlist

2026-06-20 16:15:25 +03:00