{
  "board": "/Users/nearxos/Documents/KiCad/10.0/USB_PD_ESP32S3/USB_PD_ESP32S3.kicad_pcb",
  "timestamp": "2026-06-20T17:50:49",
  "total_violations": 42,
  "violation_counts": {
    "items_not_allowed": 5,
    "clearance": 1,
    "courtyards_overlap": 4,
    "copper_edge_clearance": 4,
    "drill_out_of_range": 12,
    "invalid_outline": 7,
    "solder_mask_bridge": 1,
    "silk_edge_clearance": 2,
    "silk_overlap": 1,
    "silk_over_copper": 5
  },
  "severity_counts": {
    "error": 34,
    "warning": 8,
    "info": 0
  },
  "violations": [
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 25.825,
        "y": 4.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 25.0,
        "y": 4.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 41.175,
        "y": 4.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 42.825,
        "y": 4.0,
        "unit": "mm"
      }
    },
    {
      "type": "items_not_allowed",
      "severity": "error",
      "message": "Items not allowed (keepout area of U1)",
      "location": {
        "x": 42.0,
        "y": 4.0,
        "unit": "mm"
      }
    },
    {
      "type": "clearance",
      "severity": "error",
      "message": "Clearance violation ( clearance 0.2000 mm; actual 0.0000 mm)",
      "location": {
        "x": 24.175,
        "y": 4.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 50.0,
        "y": 12.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 50.0,
        "y": 12.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 50.0,
        "y": 12.0,
        "unit": "mm"
      }
    },
    {
      "type": "courtyards_overlap",
      "severity": "error",
      "message": "Courtyards overlap",
      "location": {
        "x": 25.0,
        "y": 4.0,
        "unit": "mm"
      }
    },
    {
      "type": "copper_edge_clearance",
      "severity": "error",
      "message": "Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.0000 mm)",
      "location": {
        "x": 65.0,
        "y": 30.0,
        "unit": "mm"
      }
    },
    {
      "type": "copper_edge_clearance",
      "severity": "error",
      "message": "Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.0000 mm)",
      "location": {
        "x": 65.0,
        "y": 30.0,
        "unit": "mm"
      }
    },
    {
      "type": "copper_edge_clearance",
      "severity": "error",
      "message": "Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.1800 mm)",
      "location": {
        "x": 0.0,
        "y": 30.0,
        "unit": "mm"
      }
    },
    {
      "type": "copper_edge_clearance",
      "severity": "error",
      "message": "Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.1800 mm)",
      "location": {
        "x": 0.0,
        "y": 30.0,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 47.1,
        "y": 13.76,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 47.1,
        "y": 15.16,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 47.8,
        "y": 13.06,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 47.8,
        "y": 14.46,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 47.8,
        "y": 15.86,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 48.5,
        "y": 13.76,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 48.5,
        "y": 15.16,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 49.2,
        "y": 13.06,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 49.2,
        "y": 14.46,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 49.2,
        "y": 15.86,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 49.9,
        "y": 13.76,
        "unit": "mm"
      }
    },
    {
      "type": "drill_out_of_range",
      "severity": "error",
      "message": "Hole size out of range (board setup constraints min hole 0.2500 mm; actual 0.2000 mm)",
      "location": {
        "x": 49.9,
        "y": 15.16,
        "unit": "mm"
      }
    },
    {
      "type": "invalid_outline",
      "severity": "error",
      "message": "Board has malformed outline (self-intersecting)",
      "location": {
        "x": 0.0,
        "y": 30.0,
        "unit": "mm"
      }
    },
    {
      "type": "invalid_outline",
      "severity": "error",
      "message": "Board has malformed outline (self-intersecting)",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "invalid_outline",
      "severity": "error",
      "message": "Board has malformed outline (self-intersecting)",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "invalid_outline",
      "severity": "error",
      "message": "Board has malformed outline (self-intersecting)",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "invalid_outline",
      "severity": "error",
      "message": "Board has malformed outline (self-intersecting)",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "invalid_outline",
      "severity": "error",
      "message": "Board has malformed outline (self-intersecting)",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "invalid_outline",
      "severity": "error",
      "message": "Board has malformed outline (self-intersecting)",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "solder_mask_bridge",
      "severity": "error",
      "message": "Front solder mask aperture bridges items with different nets",
      "location": {
        "x": 24.825,
        "y": 4.0,
        "unit": "mm"
      }
    },
    {
      "type": "silk_edge_clearance",
      "severity": "warning",
      "message": "Silkscreen clipped by board edge",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "silk_edge_clearance",
      "severity": "warning",
      "message": "Silkscreen clipped by board edge",
      "location": {
        "x": 0.0,
        "y": 0.0,
        "unit": "mm"
      }
    },
    {
      "type": "silk_overlap",
      "severity": "warning",
      "message": "Silkscreen clearance",
      "location": {
        "x": 25.0,
        "y": 2.57,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 40.8,
        "y": -0.9,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 24.762742,
        "y": 3.4775,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 24.762742,
        "y": 4.5225,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 23.762742,
        "y": 4.5225,
        "unit": "mm"
      }
    },
    {
      "type": "silk_over_copper",
      "severity": "warning",
      "message": "Silkscreen clipped by solder mask",
      "location": {
        "x": 23.762742,
        "y": 3.4775,
        "unit": "mm"
      }
    }
  ]
}