# Alpine 5G Router – configuration example
# Copy to /etc/5g-router.conf and edit. Used by connect-5g.sh and configure_fm350_5g.sh

# Modem
AT_PORT="/dev/ttyUSB1"
APN="internet"

# Interfaces (WAN = 5G modem RNDIS, LAN = VLAN for clients)
WAN_IF="eth1"
LAN_IF="eth0.100"

# Optional: fallback to eth0 when 5G is down (use ethernet as default route)
FAILOVER_ENABLED="no"
FAILOVER_IF="eth0"
FAILOVER_METRIC="202"

# Watchdog: re-check 5G connectivity every N seconds (0 = disabled, run once)
WATCHDOG_INTERVAL="0"

# Log signal strength to /var/log/5g-router.log (yes/no)
LOG_SIGNAL="yes"

# Alert when signal CSQ below this (0 = disabled)
WEAK_SIGNAL_CSQ="10"

# Optional: DNS servers (used when 5G is up; comma-separated)
# DNS_SERVERS="195.14.130.220,195.14.154.100"